Skip to main content

LS 202 Help

David Young
Updated

 LS 202 Incident Form Help

Sample Form

The LS 202 Form

The LS 202 was released Sunday, 7-17-2011. This form will be activated upon request.  The customers that have already requested it will find it activated when released. Others will see it greyed out as with Auto Property and GL for non-subscribers of the accord forms.  There is no additional fee for access to the LS 202. Other active customers may request this feature by email at support@firstrecords.com.

 It is not based on Jurisdictions as are the State FROI’s.  The employer may select the LS 202 and when completed can generate a PDF report.  The data form, like all FROI’s, also satisfies OSHA recordkeeping requirements.  Additionally, the User may choose to create a State specific FROI by selecting that button at the bottom of the LS 202 Data form. This will prefill the common data fields on the State data form and provide the ability for the creation of the state FROI PDF report. About 18 states require a copy of the incident on their FROI form even though the primary recipient is the DOL. The customer should NOT create an incident record through our traditional method of “Incidents, Create, Osha/WC because there will then be duplicate records and you cannot create a LS 202 from the State Data form, only the inverse.

 

That data form and the LS 202 data form will have the same FROLID # and the state form can only be accessed through the LS 202 data form or by doing an “Incident, Edit, search” to select it.

 

The Form Assistant should also be used for the “Carrier” and other data points similarly to the State FROI’s.

 

All the LS 202 information will be included in any incident searches and Summary Reports as any WC incident record would. The State form cannot be transmitted.  The LS 202 can be transmitted via our FAX feature, although the DOL has stated that they will not accept direct FAXes without original signatures.

 

Important notes on how the LS202 function works:

  1. Access to the LS202 form is controlled by the product type defined for an individual user.
  2. The product type defined for an employer or group only affects access to the LS202 form when new users profiles are created. If a high level user drills down into a lower level and creates a new user profile, the new user will inherit the product type defined for the employer or group.
  3. LS202 data is maintained separate from other types of data (OahsWC and Acord) with 2 exceptions. Information summary data presented on the Home page combines LS202 data with other data types as indicated by the footnotes on the Home page. OSHA related reports (OSHA, DART, Privacy, Sharps)include OshaWC data and LS202 data.
  4. The only summary reporting of LS202 data is via Reports >> Summary>> LS202 off of the main menu.
  5. If the FROLID data field is included in a LS202 Summary report, the FROLID will include an asterisk (i.e. 1205001*) to indicate that the LS202 incident has a related workers comp incident created. LS202 FROLIDs that do not include an asterisk have no related workers comp incident.
  6. Once an LS202 incident has been created, a related Workers Compensation incident record can be created in the same jurisdiction (i.e. Location State) by clicking on the WComp button at the bottom of the form. Note that "OSHA only" users will be taken to the OSHA 301 incident form and not the state form.
  7. LS202 incident related activities (i.e. Create, Edit, GoTo) start from the LS202 incident form. There is no way to perform these activities on a related workers comp incident record without going through the LS202 form first and then clicking the WComp button at the bottom of the form.
  8. All additional activities (i.e. Notes, CPA, Cost Tracking, etc.) are available for LS202 incidents and are initiated from the incident selection form, the LS202 form or the related Workers Comp form. Note that the system maintains one set of additional data records per LS202 incident regardless of where the activity is initiated. For example, opening the Cost Tracking form from the related Workers Comp form will display the same data as if the cost tracking form had been opened from the incident selection form or the LS202 form.
  9. LS202 Incidents can only be transmitted, hidden or deleted from the LS202 form. These buttons do not appear on the related Workers Comp incident form.
  10. The Report button on the LS202 form generates an LS202 report. On a related Workers Comp incident form the Report button generates the appropriate state report.
  11. LS202 incidents can be moved just like any other incident. If a related Workers Comp incident exists, it will be moved along with the LS202 incident.

 This application is "Incident Record" based.

This page includes all the fields of information required to complete the OSHA log reports, OSHA related reports and "first reports of injury", FROIs.

If you used the “Form Assistant” many of the data fields are already complete. Verify that the pre-filled data is correct.  Enter appropriate information in any empty fields.

All fields on the form except "User Defined Fields" are provided by State or Federal regulations. You are responsible for the completeness and accuracy of the information you enter and report.

It is not necessary to complete every field to generate a report. Fields that you leave blank can be completed later. Entries can be corrected or embellished by you later.  Fields bordered in red are required in order to save the record in FROL (FirstReport Online). 

Only the latest saved version of the data is stored, not revision histories. Generated reports are not stored. They are deleted when you exit the login session.

Function

  • Navigation
  • Data validation
  • Jurisdiction
  • Verification data
  • Data input groups
  • Buttons
  • Sample IA1 Incident form in HTML format 

Navigation

The incident record data is all entered on one web page.

  • There are no "Previous" or "Next" buttons needed.
  • Attempts to "back" up may cause loss of data. 
  • "+" buttons display groups of data fields by topic.
  • "-" hides the data fields by group.
  • The "Security Log-out" 30 minute timer requires you to save your work to refresh the timer.
  • If "Logged Out" by the timer on this form you may login again to access the form without losing your work. 
    • Re-enter your UserID and Password
    • Select "Save" at the bottom of the form
  • There is always only one data field per row
  • Context "Help" is displayed in 3 rows below the Incidents >> Reports>> Manage>> commands.
    • Click the cursor in the data entry field to have the "Help" text presented.
    • The opening "O" and or "W" text shows if the field is required by OSHA, WC or both.

Data validation

There is no validation of the accuracy of your data input. There is validation of the format of the data type such as date, time or number of characters.

The required fields in red boxes are for the software system not regulation compliance.

Jurisdiction

The dark gray bar at the top of the form displays the jurisdiction that the form supports. Here are the types.

  • OSHA Incident Report Form
    • All OSHA data fields
    • Seen by OSHA Only accounts or Users
    • Generates OSHA 301s only
  • Generic Incident Report Form
    • Includes all OSHA data fields
    • Includes IA1 Workers Comp questions for about 18 states
    • Is used if the location profile state field has 2 letters not used by states
    • Generates IA1 FROIs
    • Generates OSHA 301s
  • "State name" Incident Report Form
    • Will show the state name in the dark gray bar
    • Includes all OSHA data fields
    • Includes state specific Workers Comp questions
    • Generates state specific FROIs
    • Generates OSHA 301s

Verification data

The first section of fields in light gray (Employer Name...) cannot be edited. They are there for you to verify that your data is being entered in the correct area of the database.

The FROL ID # is also displayed. It is..

  • System generated
  • Universally unique
  • Can not be changed. 
  • Not required by any regulation.
  • Useful for recalling the record quickly

Data input groups

Will hold all the incident record specific data. This is the heart of the recordkeeping database.

  • Basic Case Information
    • Report Number
      • System generated sequentially at the Employer Level for all locations
      • User edits permitted
      • The OSHA log requires it to be "unique"
    • Date OF Injury
      • System generated with today's date
      • User edits permitted
      • Keyed to by management reports
    • For Information Only
      • Select the “For Information Only” checkbox to print “For Information Only – Do Not File” on the printed first report form.
      • Used for First Aid cases.
      • Used if your company pays small claims out of pocket.
  • Employee Information
    • "User Defined EmployeeID" is searchable. often used verses SSN
    • The "Occupation Description" field may be customized. See Article
  • Incident Description
    • Many are state specific
    • Drop down Pick lists
      • Are standard terminologies
      • Green selections offer "User Defined" options
      • Correctly categorize for the OSHA log
      • If dates are requested in this section it is for Workers Comp FROIs not OSHA
    • Selecting a User Defined Type of Injury
      • Select one of the following descriptions to create a user-defined type of injury:
      • All other specific injuries
      • NOC (not otherwise classified)
      • All other occupational disease/injury, NOC
      • All other cumulative injuries, NOC
      • Choose a previously defined custom description, or select “New” and enter your description in the blank field.  
  • Medical Treatment
    • Use the "Form Assistant" to pre-fill the Hospital and Physician data fields
  • OSHA Recordability - See Article
    • Auto Calculator will collect cumulative days. See "Auto Calculator" Article.
    • Number of days will be posted on the OSHA log
    • Check "OSHA Recordable" to put record on OSHA 300 log
  • Employer/Preparer Information
    • Records person responsible for report content
  • Identification Code
    • Used often by carriers and employers for cost codes or management reports.
    • Pre-loadable in Setup Form
    • Not required by regulation
  • User Defined Fields
    • Not required by regulation
    • Text 1 & 2 fields may be customized

Buttons

Mouse over the button to see a "Help Text" description near the top of the page.

  • Show All / Hide All
    • Displays or hides all fields in all categories
  • Help
    • Displays KnowledgeBase Article for this form
  • Last Report Generated
    • Link to the most recent report generated in this session
    • Click to display report in new window
    • Right click mouse on link to "Save Target As" the file locally without opening
  • Click here to create and email notification
    • Will create a "Mail to" email message with basic incident data included
    • To: email addresses may be pre-loaded in the Setup Form
    • Appears after record has been saved once
  • Begin Transmit Process
    •  Optional feature. Visible only if activated for the UserID
    • Appears after record has been saved once
  • Export Data
    • Produces a complete export of the record data to a "CSV" file
  • Top Of Page
    • Auto-scrolls to top of form
  • Cancel
    • Leaves the incident form. Similar to selecting "Home"
  • Report Type
    • Report selection for OSHA 301 or the FROI
    • Works with the "Report" button
  • Analyze
    • Optional feature. Visible only if activated for the UserID
    • Open the CPA root cause analysis tool for that record
    • Leaves the Incident record with no direct return button
  • Reset
    •  Restores data to the original value last saved
  • Hide
    • Hides this record from being included in management reports and logs
    • Can "Unhide" in the future using the "Edit" "Search" "Hidden" function
  • Delete
    • Deletes this record and returns to "Home"
    • Can "Undelete" until midnight EST using the "Edit" "Search" "Deleted" function
  • WComp
    • Saves the data and then opens a Works Comp FROI data entry form so you may complete and save/print the State FROI related to this incident. Many states require this.
    • The associated state data entry form can only be accessed by this button.
    • This state workers comp report can not be transmitted.
  • Report
    • Select type then click on "Report"
    • "Last Report Generated" will display link at top of this form
  • Notes
    • Case Notes may be created for each incident record
    • Select "Notes" and you will proceed to the Case Notes form
    • Notes can be created as Pubic or Private
  • Save
    • Will save edits
    • Resets Security Log-out Timer to 30 minutes
    • Returns to top of this form
    • If User is "Read-Only" the page will refresh without saving any edits
  • Report History
    • An extended list of reports generated in this session prior to the "Last Report Generated"
    • Click to display report in new window
    • Right click mouse on link to "Save Target As" the file locally without opening
    • Reports will be deleted at the end of this login session

 

Related articles

Comments

0 comments

Please sign in to leave a comment.

Powered by Zendesk